Product Description
HDG coils according to European and Ukrainian standards
Galvanised steel coils as per the European EN 10346 and the similar Ukrainian DSTU EN 10346 standards can be coated with zinc, zinc-iron alloy, zinc-aluminium alloy, aluminium-zinc alloy or aluminium-silicon alloy:
Zinc coating (Z) is achieved by dipping the prepared strip into a bath with molten alloy, containing at least 99% zinc. This is the most common and traditional way of protecting rolled steel from corrosion.
Zinc-iron coating (ZF) is formed by dipping a strip into a bath of molten zinc (at least 99% zinc) with further annealing to form a zinc-iron coating with an Fe content of 8-12%. Such coating is stronger than the traditional zinc coating and has better adhesion with substrate steel due to mutual diffusion between the iron and zinc in the surface layers. That is why this coating is less exposed to lamination or pitting under impact, mechanical stresses or deformation of treated products.
Zinc-aluminium coating (ZA) is applied to rolled steel by dipping it into a bath of zinc and about 5% aluminium with a minor content of mishmetal (mix of metals). Rolled steel with such coating has better formability and corrosion protection properties compared with zinc-coated steel.
Aluminium-zinc coating (AZ) is applied by dipping steel into a bath of molten metal consisting of 55% aluminium and 1.6% silicon (with the remaining being taken up by zinc). The combined action of these metals ensures the best corrosion protection compared with other coatings.
Aluminium-silicon coating (AS) is created by dipping steel into a bath of molten metal containing aluminium and 8-11% silicon. Galvanized steel coil with such coating is highly resistant to oxidation at high temperature (up to 650°C) and highly resistant to chemical corrosion.
Galvanised steel coils manufactured according to the EN 10346 and DSTU EN 10346 standards can be made from the following steels:
Low-carbon steel for cold forming (DX51D - DX57D). These products are classified based on suitability for cold forming: DX51D - bending and profiling quality; DX52D - drawing quality; DX53D - deep-drawing quality; DX54D - special deep-drawing quality; DX55D - special deep-drawing quality (only +AS); DX56D - extra deep drawing quality; DX57D - super deep drawing quality.
Steel for construction and framing (S220GD - S550GD). Rolled products are arranged in increasing yield stress (Rp0.2), which is indicated in the marking. Rolled products of S220GD - S550GD steel are mainly used in the manufacture of formed sections (Z-, C-, sigma-, U-shaped profiles, etc) for light-gauge steel structures.
Steel with high yield strength for cold forming (HX160YD, HX180YD, HX180BD, HX220YD, HX300LAD, etc). Such rolled products are arranged in increasing yield stress (Rp0.2), which is indicated in the marking. The marking also contains the following information: H - high-strength flat rolled products for cold forming; Х - as-rolled condition (hot-rolled or cold-rolled) is not defined; D - designed for hot-dip coating; B - heat-treated steel; Y - steel with higher formability; LA - low-alloy / micro-alloy steel.
Cold-formable multi-phase steel (HDT450F, HCT490X, HDT590X, HCT780X, HCT980X, HCT780T, HDT580X, etc). Rolled products are arranged in increasing minimum tensile strength (Rm0.2), which is indicated in the marking. The marking also contains the following information: H - high-strength flat-rolled products for cold forming; С - cold-rolled products; D - hot-rolled products; Т (nnn) - the minimum tensile strength in MPa. The last symbol: F - ferrite-bainite, Х - dual-phase; Т - TRIP, С - complex-phase; М - martensite.
| Q/BQB 420-2003 |
EN 10142:2000 |
EN 10142:1990 |
JISG3302-1994 |
ASTMA653M-2002 |
| EN 10147:2000 |
EN 10147:1991 |
| EN 10292:2000 |
|
| DC51D+Z(St01Z,St02Z,St03Z),DC51D+ZF |
DX51D+Z,+ZF |
FeP02GZ,ZF |
SGCC |
CS Type C |
| SGHC |
DC52D+Z(St04Z)
DC52D+ZF |
DX52D+Z,+ZF |
FeP03GZ,ZF |
SGCD1 |
CS Type A,Type B |
DC53D+Z(St05Z)
DC53D+ZF |
DX53D+Z,+ZF |
FeP05GZ,ZF |
SGCD2 |
FS Type A,Type B |
| SGCD3 |
| distinguish |
Surface and Appearance Requirements |
| home appliances |
Micro-wave oven(L/S), home appliance side panels, etc. |
Use smooth small spangle or zero spangle hot-dip galvanized steel strip, and the defects that must not exist include rust, corrosion, perforation, delamination, serious head-up lines, impact damage, fold marks, serious edge burrs, large waves, Intensive periodic concave and convex points, obvious zinc slag, zinc spot, galvanized line, zinc layer falling off |
| Appliance door panels (T/R,H/G)wait |
Use zero-spangle hot-dip galvanized steel strip, and the defects that must not exist include rust, corrosion, perforation, delamination, severe head-up lines, impact damage, fold marks, serious edge burrs, large waves, and dense periodic bumps. , Obvious zinc slag, zinc spot, galvanized line, zinc layer peeling off |
| architecture |
Building exterior decoration (C/S) |
Use smooth small spangle or zero spangle hot-dip galvanized steel strip, and the defects that must not exist include rust, corrosion, perforation, delamination, serious head-up lines, impact damage, fold marks, serious edge burrs, large waves, Intensive periodic concave and convex points, obvious zinc slag, zinc spot, galvanized line, zinc layer falling off. To some extent, the surface roughness is allowed to be slightly larger |
Our Advantages
WIDE APPLICATION
Hot-dip galvanized coils can be divided into hot-rolled galvanized coils and cold-rolled hot-dip galvanized coils, which are mainly used in construction, home appliances, automobiles, containers, transportation and household industries. Especially steel structure construction, automobile manufacturing, steel silo manufacturing and other industries. Their main features are: strong corrosion resistance, good surface quality, conducive to deep processing, economical and practical, etc.
SUFFICIENT STOCK
Galvanized coil factory direct sales, complete models, sufficient inventory, welcome to inquire, honest management, large quantity and high price, factory direct supply, spot supply welcome your consultation, professional management of automotive steel, galvanized coil, hot-dip coil, Sufficient stock of various models.
Attention to detail
Zhengde hot-dip galvanized strip steel is produced with hot-rolled strip steel as the substrate through pickling, cold rolling, heating reduction, galvanizing and other technological processes. Its products can fully meet the international leading standards and can be obtained in the construction industry. A large number of applications can also be used in industries such as automobiles, railway locomotive manufacturing, warehouse board manufacturing, highway guardrails, etc. The surface spangles can be customized according to requirements.
Provide deep processing
Galvanized steel coils can be processed according to customer requirements: one-stop service such as processing Kaiping, galvanized steel coil slitting, cutting small plates, and door-to-door delivery. The galvanized steel coil slitting width is 5mm-1500mm, and the thickness is 0.1mm-3mm.
Quality first: production and inspection in strict accordance with production standards;
Price advantage: discounts based on real market prices;
Transaction security: There will be no loss of customer funds;
After-sales guarantee: the customer's problem is our problem;
Long-term cooperation: quality assurance, price advantage, sincere service can last for a long time.
Detailed Photos
Packaging & Shipping
Company Profile
Shandong Zhengde Metal Manufacturing Co., Ltd. is a production and sales company integrating hot-rolled steel coils, cold-rolled steel coils, galvanized steel coils, color-coated steel coils, section steel, steel pipes, steel wires, metal mesh, stainless steel, aluminum, copper and other metal products integrated large enterprises. Five production and sales bases have been formed in Binzhou, Liaocheng, Wuxi, Tianjin, Jinan and Tai'an, with more than 100 production lines, 4 nationally recognized laboratories, 2 technical engineering centers, and 5 enterprise technology centers. Products are exported to more than 50 countries and regions such as North America, South America, Europe, Africa, Oceania, Middle East, and Southeast Asia.
Certifications
FAQ:
1. Are you a trading company or a factory?
A: We are a direct factory with more than 30 years of production experience, a professional technical team, production team, overseas sales team, can solve various problems for you
2 .What's your advantage?
A: Great products with competitive price and professional service on export business.
3. How I believe you?
A : We consider honesty as the core of our company, we can tell you the contact information of our some other clients for you to check our credit. Besides, there is trade assurance from Alibaba, your order and money will be well guaranteed.
4.Can you give warranty of your products?
A: Yes, we extend a 100% satisfaction guarantee on all items. Please feel free to feedback immediately if you are not pleased with our quality or service.
5.Where are you? Can I visit you?
A: Sure,welcome to you visit our factory at any time.
6.How about the delivery time?
A: We have multiple warehouses, some products are in stock, and we can ship them to you immediately!
Other products that need to be produced will be produced within 10-15 days at the earliest according to your requirements; large orders will be produced according to the specific situation.
7.what kind of payment does your company support?
A: T/T, 100% L/C at sight, Cash, Western Union are all accepted if you have other payment,please contact me.
){kind=link}