Factory Low Price Sy290 Cold Rolled U Steel Sheet Pile Hot Rolled U-Type for Retaining Wall Cold Rolled Larsen Steel Sheet Piles

• Customization: Available
• Standard: DIN, JIS, AISI, ASTM, GB, BS
• Technics: Hot Rolled
• Model NO.: ZD-SP59
• Application: Structural Steel Bar
• Surface: Black
• Alloy: Alloy
• Special Use: High-strength Steel Plate, Wear Resistant Steel, Silicon Steel, Cold Heading Steel, Free Cutting Steel, Mold Steel
• Material: S240gp/S270gp/S330gp/S355gp/S390gp/S460ap
• Custom Made: Yes
• Custom Cycle: 7-15 Days
• Production Standards: ASTM/JIS/AISI/DIN/BS/En/GB
• Payment Term: 30%T/T Advance + 70% Balance
• Alloy or Not: Low Alloy
• MOQ: 3tons
• Lengh: Customized
• Advantage: Wear Resistance, Machinability, Easy Welding
• Specification2: Zd-Hrsp Au/Zu/PU/Az
• Specification3: Au600/Au750/Az580/Za680
• Shape: U/Z/S/L
• Transport Package: Export Standard Package/as Request
• Specification: According to customer requirements
• Trademark: ZHENGDE
• Origin: China
• HS Code: 7214200000
• Production Capacity: 35000 Tons/Month

Product Description

Product Description

Sheet piles are sections of sheet materials with interlocking edges that are driven into the ground to provide earth retention and excavation support. Sheet piles are most commonly made of steel, but can also be formed of timber or reinforced concrete. They are installed in sequence to design depth along the planned excavation perimeter or seawall alignment. The interlocked sheet piles form a wall for permanent or temporary lateral earth support with reduced groundwater inflow. Anchors can be included to provide additional lateral support if required.

Sheet piles are commonly used for retaining walls, land reclamation, underground structures such as car parks and basements, in marine locations for riverbank protection, seawalls, cofferdams, and so on. Permanent steel sheet piles are designed to provide a long service life. Vibratory hammers are typically used to install sheet piles. If soils are too hard or dense, an impact hammer can be used to complete the installation. For the development of sheet piles, there are two main techniques: hot-rolled and cold-formed. At high temperatures, hot rolled piles are produced and the interlocks appear to be stronger and more resilient.

Advantages of sheet pile;

Recyclable and reusable.
Available a wide range of lengths, size and steel options.
Can be used for temporary and permanent structures.
Can be installed using silent and vibration-free methods.
Quicker installation than contiguous or secant walls.
Cofferdams can be constructed in almost any desired shape,
Provide a close-fitting joint to form an effective water seal.
Light in weight, making lifting and handling easy
Length and design of the pile are easily adjustable
Joints are designed to withstand the high pressure necessary for them to be placed in place
A little maintenance is needed above and underwater

Type	Width	Height	Thickness	Sectional area	Weight per pile	Weight per wall	Moment of Inertia	Modulus of section
	mm	mm	mm	Cm2/m	Kg/m	Kg/ m2	Cm4/m	Cm3/m
ZDU7	750	320	5	71.3	42	56	10725	670
ZDU8	750	320	6	86.7	51	68.1	13169	823
ZDU9	750	320	7	101.4	59.7	79.6	15251	953
ZDU10-450	450	360	8	148.6	52.5	116.7	18268	1015
ZDU11-450	450	360	9	165.9	58.6	130.2	20375	1132
ZDU12-450	450	360	10	182.9	64.7	143.8	22444	1247
ZDU11-575	575	360	8	133.8	60.4	105.1	19685	1094
ZDU12-575	575	360	9	149.5	67.5	117.4	21973	1221
ZDU13-575	575	360	10	165	74.5	129.5	24224	1346
ZDU11-600	600	360	8	131.4	61.9	103.2	19897	1105
ZDU12-600	600	360	9	147.3	69.5	115.8	22213	1234
ZDU13-600	600	360	10	162.4	76.5	127.5	24491	1361
ZDU18- 600	600	350	12	220.3	103.8	172.9	32797	1874
ZDU20- 600	600	350	13	238.5	112.3	187.2	35224	2013
ZDU16	650	480	8	138.5	71.3	109.6	39864	1661
ZDU 18	650	480	9	156.1	79.5	122.3	44521	1855
ZDU20	650	540	8	153.7	78.1	120.2	56002	2074
ZDU23	650	540	9	169.4	87.3	133	61084	2318
ZDU26	650	540	10	187.4	96.2	146.9	69093	2559
ZDU30-700	700	558	11	217.1	119.3	170.5	83139	2980
For more technical parameters of steel sheet piles, please contact us for details

Our Advantages

Excellent characteristics
As a reusable green and environment-friendly foundation structure material, hot-rolled U-shaped steel sheet piles are highly efficient, durable, simple, lightweight, and have an excellent cross-sectional shape that is sealed and anti-seepage. And unique advantages such as safety and environmental protection.Compared with other structures, it has a light structure, strong bearing capacity, and good earthquake resistance; strong water insulation, which can make the structure quickly stop water or plug leaks, impervious to penetration and easy to construct.

Major application
The first phase project of Shanghai Changxing Island Shipbuilding Base, Tangshan Caofeidian Coal Wharf and other major projects, the amount of one-time steel sheet piles for these projects has reached 10,000 tons. In addition, in the application of foundation pit enclosure, water retaining cofferdam, wharf construction, etc., such as the second phase project of Pudong International Airport, Shanghai World Expo Project, and the temporary enclosure of steel sheet piles for Hangzhou Bay Bridge are also relatively large.

Attention to detailSteel sheet piles are inspected for appearance surface defects, length, width, thickness, height, end square ratio, straightness and lock shape, and channel steel piles are inspected for appearance surface defects, length, width, thickness, height, end angle , straightness and other inspections, cut off the welded parts on the pile that affect the pile driving (there are cut holes and section defects should be reinforced).

Full range
Cold-formed steel sheet piles and hot-rolled steel sheet piles can be produced in U-shape, Z-shape, and W-shape. The manufacturing process is different. The wall thickness of cold-formed steel sheet piles is the same, and the thickness of hot-rolled steel sheet piles is different in different parts. do thick.
The length of hot-rolled steel sheet piles is generally limited, mainly 9 meters, 12 meters, 15 meters, 18 meters, 400 wide, and 600 wide. The water stop effect is generally better than that of cold bending, and the market stock is large.

Quality first: production and inspection in strict accordance with production standards;
Price advantage: discounts based on real market prices;
Transaction security: There will be no loss of customer funds;
After-sales guarantee: the customer's problem is our problem;
Long-term cooperation: quality assurance, price advantage, sincere service can last for a long time.

Detailed Photos

Packaging & Shipping

Company Profile

Shandong Zhengde Metal Manufacturing Co., Ltd. is a production and sales company integrating hot-rolled steel coils, cold-rolled steel coils, galvanized steel coils, color-coated steel coils, section steel, steel pipes, steel wires, metal mesh, stainless steel, aluminum, copper and other metal products integrated large enterprises. Five production and sales bases have been formed in Binzhou, Liaocheng, Wuxi, Tianjin, Jinan and Tai'an, with more than 100 production lines, 4 nationally recognized laboratories, 2 technical engineering centers, and 5 enterprise technology centers. Products are exported to more than 50 countries and regions such as North America, South America, Europe, Africa, Oceania, Middle East, and Southeast Asia.

Certifications

FAQ:

1. Are you a trading company or a factory?
A: We are a direct factory with more than 30 years of production experience, a professional technical team, production team, overseas sales team, can solve various problems for you

2 .What's your advantage?
A: Great products with competitive price and professional service on export business.

3. How I believe you?
A : We consider honesty as the core of our company, we can tell you the contact information of our some other clients for you to check our credit. Besides, there is trade assurance from Alibaba, your order and money will be well guaranteed.

4.Can you give warranty of your products?
A: Yes, we extend a 100% satisfaction guarantee on all items. Please feel free to feedback immediately if you are not pleased with our quality or service.

5.Where are you? Can I visit you?
A: Sure,welcome to you visit our factory at any time.

6.How about the delivery time?
A: We have multiple warehouses, some products are in stock, and we can ship them to you immediately!
Other products that need to be produced will be produced within 10-15 days at the earliest according to your requirements; large orders will be produced according to the specific situation.

7.what kind of payment does your company support?
A: T/T, 100% L/C at sight, Cash, Western Union are all accepted if you have other payment,please contact me.