40cr seamless steel pipe is a round steel product with a hollow section and no joints around it. It is made of a solid tube blank through perforation to make a capillary tube, and then made by hot rolling, cold rolling or cold drawing. Solid steel products such as steel pipes and round steel Compared with the same bending and torsional strength, it is lighter in weight and is an economical section steel.
Specifications for quenching and tempering treatment of 40cr seamless steel pipe:
Quenching temperature 850ºC±10ºC, oil cooling; tempering temperature 520ºC±10ºC, water and oil air cooling.
40cr seamless steel pipe characteristics:
Medium carbon tempered steel, cold heading die steel. The steel is moderately priced, easy to process, and can obtain certain toughness, plasticity and wear resistance after proper heat treatment. Normalizing can promote the spheroidization of the structure and improve the cutting performance of the hardness less than 160HBS rough. Tempering at a temperature of 550~570°C, the steel has excellent comprehensive mechanical properties. The hardenability of this steel is higher than that of 45 steel, and it is suitable for surface hardening such as high frequency quenching and flame quenching.
40cr seamless steel pipe use:
After quenching and tempering, this kind of steel is used to manufacture mechanical parts that withstand medium loads and medium speeds, such as steering knuckles, rear axle shafts of automobiles, gears, shafts, worms, spline shafts, top sleeves, etc. on machine tools; after quenching After quenching and tempering at medium temperature, it is used to manufacture parts that withstand high load, impact and medium speed, such as gears, main shafts, oil pump rotors, sliders, collars, etc.; after quenching and low temperature tempering, it is used to manufacture parts that withstand heavy loads, low Impact and wear-resistant parts with a solid thickness of less than 25mm on the cross-section, such as worms, spindles, shafts, collars, etc.; after quenching and tempering and high-frequency surface quenching, they are used to manufacture parts with high surface hardness and wear resistance. Parts without great impact, such as gears, sleeves, shafts, main shafts, crankshafts, mandrels, pins, connecting rods, screws, nuts, intake valves, etc. In addition, this steel is suitable for the manufacture of various transmission parts that undergo carbonitriding treatment, such as gears and shafts with large diameter and good low temperature toughness.
40cr seamless steel pipe supply state and hardness, annealed state, hardness ≤ 207HBS.
40cr seamless steel pipe elastic modulus: elastic modulus E (20 ºC) / MPa 200000 ~ 211700, shear modulus G (20 ºC) 80800
Quenching process of 40cr seamless steel pipe:
40cr seamless steel pipe is quenched at 850°C, oil cooled; tempered at 520°C, water cooled, oil cooled. The surface quenching hardness of 40cr seamless steel pipe is HRC52-60, and the flame quenching can reach HRC48-55.
Nitriding treatment of 40cr seamless steel pipe:
40cr seamless steel pipe is suitable for nitriding steel, and the elements contained in it are conducive to nitriding. 40Cr can obtain higher surface hardness after nitriding treatment, and the hardness of 40Cr after quenching and tempering can reach HRA72~78, that is, HRC43~55.
Nitriding workpiece process route:
Forging - annealing - rough machining - quenching and tempering - finishing - stress relief - rough grinding - nitriding - fine grinding or grinding. Since the nitrided layer is thin and brittle, a higher-strength core structure is required, so quenching and tempering heat treatment must be performed first to obtain tempered sorbite 40cr seamless pipes.
Pay attention to preheating before welding 40Cr, in order to prevent the quenching and cracking inside the weld due to the heat dissipation of the matrix. Normalize once before quenching and tempering after welding.
Weldability of 40cr seamless steel pipe:
It is easy to segregate during crystallization and is sensitive to crystallization cracks (a kind of thermal crack). It is easy to crack in the concave part of the arc crater and weld during welding. The carbon content is high, and it is easy to obtain a hardened structure (martensite structure) that is sensitive to cold cracks during rapid cooling. When the cooling rate in the superheated zone is large, it is easy to form hard and brittle high-carbon martensite, which makes the superheated zone embrittled.
Key points of welding process:
1. Welding is generally carried out in the annealed (normalized) state.
2. The welding method is not limited
3. Increase the preheating temperature properly by using a larger linear energy. Generally, the preheating temperature and the interlayer temperature can be controlled between 250 and 300°C.
4. The welding material should ensure that the composition of the deposited metal is basically the same as that of the base metal, such as J107-Cr
5. Quenching and tempering heat treatment should be carried out in time after welding. If it is difficult to carry out quenching and tempering treatment in time, intermediate annealing or holding at a temperature higher than the preheating temperature for a period of time can be carried out to eliminate the diffusible hydrogen and soften the tissue. For products with complex structures and many welds, intermediate annealing can be performed after a certain number of welds have been welded.
Zhengde hot-rolled seamless steel pipe is a long strip of steel with a hollow section and no joints around it. The steel pipe has a hollow cross-section and is widely used as a pipeline for transporting fluids, such as pipelines for transporting oil, natural gas, gas, water and certain solid materials. Compared with solid steel such as round steel, seamless steel pipe is lighter in weight when the bending and torsional strength is the same. It is an economical section steel and is widely used in the manufacture of structural parts and mechanical parts, such as oil drill pipes and automobile transmission shafts. , bicycle racks and steel scaffolding used in building construction, etc. The use of seamless steel pipes to manufacture ring parts can improve the utilization rate of materials, simplify the manufacturing process, save materials and processing hours, such as rolling bearing rings, jack sets, etc., which have been widely used in steel pipes. Hot-rolled seamless steel pipe is also an indispensable material for various conventional weapons. Gun barrels, barrels, etc. must be made of steel pipes.
thick
Φ |
3 |
3.5 |
4 |
4.5 |
5 |
5.5 |
6 |
6.5 |
7 |
8 |
8.5 |
9 |
10 |
12 |
| 32 |
2.146 |
2.46 |
2.762 |
3.052 |
3.329 |
3.594 |
3.847 |
4.088 |
|
|
|
|
|
|
| 38 |
2.589 |
2.978 |
3.354 |
3.718 |
4.069 |
4.408 |
4.735 |
5.049 |
|
|
|
|
|
|
| 42 |
2.885 |
3.323 |
3.749 |
4.162 |
4.562 |
4.951 |
5.327 |
5.691 |
|
|
|
|
|
|
| 45 |
3.107 |
3.582 |
4.044 |
4.495 |
4.932 |
5.358 |
5.771 |
6.172 |
|
|
|
|
|
|
| 50 |
3.477 |
4.014 |
4.538 |
5.049 |
5.549 |
6.036 |
6.511 |
6.973 |
7.423 |
8.286 |
8.699 |
|
|
|
| 54 |
3.773 |
4.359 |
4.932 |
5.493 |
6.042 |
6.578 |
7.103 |
7.614 |
8.114 |
9.075 |
9.538 |
|
|
|
| 57 |
3.995 |
4.618 |
5.228 |
5.826 |
6.412 |
6.985 |
7.546 |
8.095 |
8.632 |
9.667 |
10.167 |
|
|
|
| 60 |
4.217 |
4.877 |
5.524 |
6.159 |
6.782 |
7.392 |
7.99 |
8.576 |
9.149 |
10.259 |
10.796 |
|
|
|
| 63.5 |
4.476 |
5.179 |
5.869 |
6.548 |
7.214 |
7.867 |
8.508 |
9.137 |
9.754 |
10.95 |
11.529 |
|
|
|
| 68 |
4.809 |
5.567 |
6.313 |
7.047 |
7.768 |
8.477 |
9.174 |
9.858 |
10.53 |
11.838 |
12.473 |
|
|
|
| 70 |
4.957 |
5.74 |
6.511 |
7.269 |
8.015 |
8.749 |
9.47 |
10.179 |
10.876 |
12.232 |
12.892 |
13.539 |
14.797 |
17.164 |
| 73 |
5.179 |
5.999 |
6.807 |
7.602 |
8.385 |
9.156 |
9.914 |
10.66 |
11.394 |
12.824 |
13.521 |
14.205 |
15.537 |
18.052 |
| 76 |
5.401 |
6.258 |
7.103 |
7.935 |
8.755 |
9.563 |
10.358 |
11.141 |
11.912 |
13.416 |
14.15 |
14.871 |
16.277 |
18.94 |
| 89 |
6.363 |
7.38 |
8.385 |
9.378 |
10.358 |
11.326 |
12.281 |
13.225 |
14.156 |
15.981 |
16.875 |
17.756 |
19.483 |
22.787 |
| 108 |
7.768 |
9.02 |
10.259 |
11.486 |
12.701 |
13.903 |
15.093 |
16.27 |
17.436 |
19.729 |
20.858 |
21.973 |
24.168 |
28.41 |
| 133 |
|
11.178 |
12.725 |
14.261 |
15.783 |
17.294 |
18.792 |
20.278 |
21.751 |
24.662 |
26.098 |
27.522 |
30.334 |
35.809 |
| 159 |
|
13.422 |
15.29 |
17.146 |
18.989 |
20.821 |
22.639 |
24.446 |
26.24 |
29.791 |
31.548 |
33.293 |
36.746 |
43.503 |
| 219 |
|
18.601 |
21.209 |
23.805 |
26.388 |
28.959 |
31.517 |
34.064 |
36.598 |
41.629 |
44.126 |
46.61 |
51.543 |
61.259 |
| 273 |
|
23.262 |
26.536 |
29.797 |
33.046 |
36.283 |
39.508 |
42.72 |
45.92 |
52.283 |
55.445 |
58.596 |
64.86 |
77.24 |
| 325 |
|
27.75 |
31.665 |
35.568 |
39.458 |
43.337 |
47.202 |
51.056 |
54.897 |
62.542 |
66.346 |
70.137 |
77.684 |
92.629 |
| 355 |
|
|
|
38.897 |
43.158 |
47.406 |
51.641 |
55.865 |
60.076 |
68.46 |
72.634 |
76.796 |
85.082 |
101.507 |
| 377 |
|
|
|
41.339 |
45.871 |
50.39 |
54.897 |
59.391 |
63.873 |
72.801 |
77.246 |
81.679 |
90.508 |
108.018 |
| 426 |
|
|
|
46.777 |
51.913 |
57.036 |
62.147 |
67.246 |
72.332 |
82.468 |
87.518 |
92.555 |
102.592 |
122.519 |
| 450 |
|
|
|
|
|
|
|
71.093 |
76.475 |
87.203 |
92.549 |
97.882 |
108.511 |
129.621 |
| 480 |
|
|
|
|
|
|
|
75.902 |
81.654 |
93.122 |
98.837 |
104.54 |
115.909 |
138.499 |
| 530 |
|
|
|
|
|
|
|
83.917 |
90.286 |
102.987 |
109.319 |
115.638 |
128.24 |
153.296 |
| 630 |
|
|
|
|
|
|
|
99.947 |
107.549 |
122.716 |
130.281 |
137.833 |
152.902 |
182.89 |
Our Advantages
Three-roll pipe mill
The seamless steel pipe produced by the three-roll mill for hot-rolling seamless steel pipe has high precision. Because of the cross-rolling with the mandrel, the rolling action is repeated many times in one pass, which greatly improves the accuracy of the wall thickness and is not easy to produce. Defects such as scratches, ears, and green lines; the flexibility in production is large, and the pass size can be changed with the help of the clutch of the roll.
Adequate inventory
Standing inventory of carbon seamless tubes, seamless special-shaped tubes, alloy seamless tubes, precision tubes. Various types of seamless steel pipes with a specification of 5-426*0.5-60mm and a length of 2-16m. The cold-rolled precision bright tubes produced by our factory have smooth appearance, uniform wall thickness, no oxide layer, and high precision. The inner hole of the steel pipe can be divided into round type, spline type, plum blossom type, etc. It is widely used in automobiles, motorcycles, electric power, petrochemicals, ships, aerospace, bearings, pneumatic components, oil cylinders, boiler equipment, medical equipment, fitness equipment and other industries.
Attention to detail
No matter how to choose the hot-rolled seamless steel pipe, its quality cannot be ignored. It must be noted that there should be no defects on the surface, such as small cracks or scars, etc., and that the thickness of the pipe wall is the same to ensure uniformity. The physical comparison is still very important. Only after the basic comparison of the physical objects is done, can the steel pipes that meet the needs be selected. The processing technology of each seamless steel pipe is different, which will also affect its application field. Now it is generally processed by cold drawing and hot rolling, and the processing effect of the two and the application of steel pipes will also have certain differences.
Applicable scene
Hot-rolled seamless pipes specifically include low and medium pressure boiler steel pipes, high-pressure boiler steel pipes, seamless steel pipes for ships, petroleum cracking steel pipes, seamless steel pipes for high-pressure fertilizer equipment, oil jacket steel pipes, pipeline steel pipes, hollow sucker rods, and ordinary fluid steel pipes. , structural seamless steel pipes and imported alloy steel pipes, etc., with rich varieties and complete specifications, widely used in petroleum, chemical, electric power, boilers, ships, machinery and other industries, and have been sold all over the world.
Quality first: production and inspection in strict accordance with production standards;
Price advantage: discounts based on real market prices;
Transaction security: There will be no loss of customer funds;
After-sales guarantee: the customer's problem is our problem;
Long-term cooperation: quality assurance, price advantage, sincere service can last for a long time.
Detailed Photos
Packaging & Shipping
Company Profile
Shandong Zhengde Metal Manufacturing Co., Ltd. is a production and sales company integrating hot-rolled steel coils, cold-rolled steel coils, galvanized steel coils, color-coated steel coils, section steel, steel pipes, steel wires, metal mesh, stainless steel, aluminum, copper and other metal products integrated large enterprises. Five production and sales bases have been formed in Binzhou, Liaocheng, Wuxi, Tianjin, Jinan and Tai'an, with more than 100 production lines, 4 nationally recognized laboratories, 2 technical engineering centers, and 5 enterprise technology centers. Products are exported to more than 50 countries and regions such as North America, South America, Europe, Africa, Oceania, Middle East, and Southeast Asia.
Certifications
Zhengde hot-rolled seamless steel pipe is a long strip of steel with a hollow section and no joints around it. The steel pipe has a hollow cross-section and is widely used as a pipeline for transporting fluids, such as pipelines for transporting oil, natural gas, gas, water and certain solid materials. Compared with solid steel such as round steel, seamless steel pipe is lighter in weight when the bending and torsional strength is the same. It is an economical section steel and is widely used in the manufacture of structural parts and mechanical parts, such as oil drill pipes and automobile transmission shafts. , bicycle racks and steel scaffolding used in building construction, etc. The use of seamless steel pipes to manufacture ring parts can improve the utilization rate of materials, simplify the manufacturing process, save materials and processing hours, such as rolling bearing rings, jack sets, etc., which have been widely used in steel pipes. Hot-rolled seamless steel pipe is also an indispensable material for various conventional weapons. Gun barrels, barrels, etc. must be made of steel pipes.
){kind=link}