Product Description
The galvanized steel available from ZhengDe Metal is made to the highest standards of quality. It features a protective layer that is resistant to rust and corrosion, making it suitable for many different uses. The steel sheets are hot-dipped in zinc iron alloys and have a lightly textured finish. This provides additional protection against environmental elements. Due to its rust-resistant properties, galvanized steel is a popular metal used in the manufacturing of car body parts. It's conveniently available to order from ZhengDe Metal in a range of sizes and gauges.
We have plain and profile galvanized sheet for sale, including corrugated, trapezoidal designs, etc.
During the production process, the galvanised iron sheets will be with zero spangles, small spangles, regular spangles, or big spangles. The main difference among them is the appearance, but a very slight difference in quality. So you can buy any type of galvanised steel sheet as you like. You can also contact us for samples.
Types of Galvanized Iron Sheet
There are different types of GI sheets. For example, due to the different galvanizing methods, there are hot-dip galvanized sheets and electro-galvanized steel sheets.
Hot dipped galvanized sheet is mainly produced by the continuous galvanizing process. That is, the zinc coating is applied by continuously immersing the steel coil in the molten zinc bath at temperatures of 450 degrees. This process provides a thick zinc coating that freezes into crystallized zinc spangles. The thick zinc coating offers full protection for the base steel. That's why its service life is more than 30 years under normal conditions. By the way, the zinc layer at ZhengDe Metal is Z40-275 g/m2.
Electro-galvanized sheet often uses cold rolled steel as the base metal. Then the zinc coating of the electro-galvanized sheet is applied by electro-deposition. The continuous electrolytic coating process offers a thin but very uniform zinc coating. So the electro-galvanized steel has a smoother appearance. However, its corrosion resistance is not as good as that of hot-dip galvanized steel.
Plain & Corrugated Galvanized Sheets
According to the shape design, you can find plain galvanized iron sheets and corrugated galvanized sheets (CGI). The GI sheets are available from 1 to 12 m in width, 600-1,500 mm in width, and 0.12-2.5 mm in thickness. Plain GI sheets are suitable for back panels of home appliances and furniture. Also, they can be further processed for other uses, such as door panels, fencing, etc. Corrugated sheets are very widely used as roofing or wall panels. You can choose according to your use purposes.
Galvanized steel sheet is a versatile product in various applications.
1. Construction industry - such as roofing sheets, wall panels, fencing, gutters, roof grills, balcony panels, window frames, warehouses, rolling doors, door panels, pipes, and much more.
2. Automotive industry - outer shells of car or tractor, bicycle frame, inner panels, bottom plates, container, highway fence, ship bulkhead, agricultural machinery, etc.
3. Light industry - shells and back panels of various household appliances, such as air conditioners, washing machines, refrigerators, microwave ovens, water heaters, chimneys, kitchen utensils, etc.
4. Furniture industry - wardrobe, table, bedside cabinet, file cabinet, bookshelf, and other uses;
5. Other uses - outdoor billboard, hopper, nuts, bolts, and nails, solar projects, bucket, fermentation tank, and so on.
| Hot dip galvanized and cold rolled low-carbon steel plates and strips |
commercialsnap-shaped(CQ) |
St01Z |
PT |
SGCC |
St01Z |
DX51D+Z |
CQ |
1.Suitable for manufacturing products with simple shapes; |
| St02Z |
JY |
St02Z |
LFQ |
2.It is suitable for the manufacture of mechanical snap-fit products. |
| |
|
|
(CS-A,B,C/FS-A,B) |
|
| stamping(DQ) |
St03Z |
SC |
SGCD1 |
St03Z |
DX52D+Z |
DQ |
Suitable for drawing, stamping and forming products and thickness>0.9mmrolled bite products. |
| (DDS) |
| deep drawing(DDQ) |
St04Z |
CS |
SGCD2 |
St04Z |
DX53D+Z |
DQ |
1.Suitable for manufacturing high deformation performance, deep drawn products and products with complex shapes |
| St05Z |
SGCD3 |
St05Z |
DQSK |
2.Coating thickness should generally not exceed275 g/m2 |
| |
|
|
(DDS) |
|
| Hot rolled original plate |
St01ZR |
|
SGHC |
|
|
|
|
| St02ZR |
| Structural plate |
StE280-2Z |
JG |
SGC400 |
StE280Z |
S280GD+Z |
SQ-275,340 (SS-275,340) |
It is suitable for structural products with mechanical properties and technological properties in the supply state of steel plates and steel strips. |
| StE345-2Z |
SGC440 |
StE350Z |
S350GD+Z |
| Galvanized and cold-rolled low-carbon steel plates and strips |
commercial grade |
SECC |
DX1 |
SECC |
St12ZE |
DC01ZE |
CQ |
Suitable for general purposes, can be used to make car bodies, furniture product shells, etc. |
| (CS) |
| stamping grade |
SECD |
DX2 |
SECD |
RRSt13ZE |
DC03ZE |
DQ |
It is suitable for products with molding and certain corrosion resistance requirements. |
| (DS) |
| Deep drawing |
SECE |
DX3 |
SECE |
St14ZE |
DC04ZE |
DQSK |
It is suitable for products that are difficult to form and have complex deformations. |
| DC05ZE |
(DDS) |
| Super deep drawing |
|
|
|
|
DC06ZE |
|
It is suitable for parts with extremely complex deformation, such as car boxes. |
| Structural plate |
|
DX4 |
SEFC370 |
|
|
SQ |
It is suitable for parts that require comprehensive performance and can be processed, such as purlins on buildings. |
| (SS) |
Our Advantages
WIDE APPLICATION
Generally speaking, only structural, tensile, and deep drawing galvanized sheets have tensile performance requirements. The structural galvanized sheet requires yield point, tensile strength, and elongation, etc; Only elongation is required for stretching.
Bending test is the main item to measure the process performance of thin plates, but the requirements for various galvanized sheets are not consistent in national standards. Except for structural grade, American standards do not require bending and tensile tests.
SUFFICIENT STOCK
Galvanized steel plate manufacturers have a complete range of specifications for direct sales, with a stock of 10000 tons. Various materials and standards of galvanized steel plates can also be produced according to customer requirements.
Attention to detail
Zhengde Galvanized steel plate Z-normal zinc flake: Zinc flake obtained by crystallization at normal cooling rate, can be used for general purposes: X-small zinc flake: The cooling rate is specially controlled, and the size of zinc flake is smaller than that of normal zinc flake, suitable for painting and other occasions where normal zinc flake cannot meet the requirements; GZ Finish Zinc Flower: Small zinc flowers have undergone finishing treatment and are suitable for deep drawing and ultra deep drawing processing, as well as occasions with low surface roughness requirements.
Provide deep processing
Galvanized corrugated board is a corrugated board made by rolling the surface of steel. For its standard form, there is a clear definition in the standard, that is, galvanized corrugated board is a structural board that is bent out of a series of ready-made hexagons after surface treatment by the galvanized person, has a certain bearing capacity, and can be used in buildings. Due to the lack of joints in galvanized corrugated boards, they overcome the shortcomings of traditional building structures and are easy to disassemble, move, and install.
Quality first: production and inspection in strict accordance with production standards;
Price advantage: discounts based on real market prices;
Transaction security: There will be no loss of customer funds;
After-sales guarantee: the customer's problem is our problem;
Long-term cooperation: quality assurance, price advantage, sincere service can last for a long time.
Detailed Photos
Packaging & Shipping
Company Profile
Shandong Zhengde Metal Manufacturing Co., Ltd. is a production and sales company integrating hot-rolled steel coils, cold-rolled steel coils, galvanized steel coils, color-coated steel coils, section steel, steel pipes, steel wires, metal mesh, stainless steel, aluminum, copper and other metal products integrated large enterprises. Five production and sales bases have been formed in Binzhou, Liaocheng, Wuxi, Tianjin, Jinan and Tai'an, with more than 100 production lines, 4 nationally recognized laboratories, 2 technical engineering centers, and 5 enterprise technology centers. Products are exported to more than 50 countries and regions such as North America, South America, Europe, Africa, Oceania, Middle East, and Southeast Asia.
Certifications
FAQ
1.You are a manufacturing or trading company?
---We are manufacturer. And we have years of export experience. We can ofer competitive price.
2.What quote do you offer?
---FOB&CFR&CIF and others ways according the your needs.
3. Can I have a trial order only several tons?
---Of course, We can ship the cargo for you with LCL (Less container load).
4.Can we print our own logo ?
---Yes, we can print logo for you.
5.How pay?
---T/T L/C or as you requested.
6. What is your MOQ?
---It is 1 ton each size for Gi sheet.
7. Do you provide samples?
---Yes. We could offer the sample by free but you should pay the freight cost
8.What is the quality of your products guarantee?
---We can offer the material testing report before the shipment.
9.Do you have after-sales service?
---Certainly. you can contact us at any time.
){kind=link}