Product Description
Steel Sheet Pile
The steel sheet pile is a kind of section steel with locking mouth, and its section has straight plate, groove and Z shape. It has high strength, good waterproof performance and can be reused. It can be used in water conservancy engineering, civil technology, railway and other construction industries.
Larsen sheet piles are a type of sheet pile retaining wall. Segments with serrated profiles (grooves) interlock to form walls with alternating serrations and serrations. Grooves increase resistance to bending. These segments are usually made of steel or other metals.
Developed in 1912, Larsen sheet piles are used in the construction of piers, oil terminals, waste storage facilities, bridges, houses, buildings, dry docks and other construction sites, and for reinforcing pond banks against subsidence and flooding. Larsen sheet piles are a type of sheet pile retaining wall. Segments with serrated profiles (grooves) interlock to form walls with alternating serrations and serrations. Grooves increase resistance to bending. These segments are usually made of steel or other metals.
| Type |
Width |
Height |
Thickness |
Sectional area |
Weight per pile |
Weight per wall |
Moment of Inertia |
Modulus of section |
| mm |
mm |
mm |
Cm2/m |
Kg/m |
Kg/ m2 |
Cm4/m |
Cm3/m |
| ZDU7 |
750 |
320 |
5 |
71.3 |
42 |
56 |
10725 |
670 |
| ZDU8 |
750 |
320 |
6 |
86.7 |
51 |
68.1 |
13169 |
823 |
| ZDU9 |
750 |
320 |
7 |
101.4 |
59.7 |
79.6 |
15251 |
953 |
| ZDU10-450 |
450 |
360 |
8 |
148.6 |
52.5 |
116.7 |
18268 |
1015 |
| ZDU11-450 |
450 |
360 |
9 |
165.9 |
58.6 |
130.2 |
20375 |
1132 |
| ZDU12-450 |
450 |
360 |
10 |
182.9 |
64.7 |
143.8 |
22444 |
1247 |
| ZDU11-575 |
575 |
360 |
8 |
133.8 |
60.4 |
105.1 |
19685 |
1094 |
| ZDU12-575 |
575 |
360 |
9 |
149.5 |
67.5 |
117.4 |
21973 |
1221 |
| ZDU13-575 |
575 |
360 |
10 |
165 |
74.5 |
129.5 |
24224 |
1346 |
| ZDU11-600 |
600 |
360 |
8 |
131.4 |
61.9 |
103.2 |
19897 |
1105 |
| ZDU12-600 |
600 |
360 |
9 |
147.3 |
69.5 |
115.8 |
22213 |
1234 |
| ZDU13-600 |
600 |
360 |
10 |
162.4 |
76.5 |
127.5 |
24491 |
1361 |
| ZDU18- 600 |
600 |
350 |
12 |
220.3 |
103.8 |
172.9 |
32797 |
1874 |
| ZDU20- 600 |
600 |
350 |
13 |
238.5 |
112.3 |
187.2 |
35224 |
2013 |
| ZDU16 |
650 |
480 |
8 |
138.5 |
71.3 |
109.6 |
39864 |
1661 |
| ZDU 18 |
650 |
480 |
9 |
156.1 |
79.5 |
122.3 |
44521 |
1855 |
| ZDU20 |
650 |
540 |
8 |
153.7 |
78.1 |
120.2 |
56002 |
2074 |
| ZDU23 |
650 |
540 |
9 |
169.4 |
87.3 |
133 |
61084 |
2318 |
| ZDU26 |
650 |
540 |
10 |
187.4 |
96.2 |
146.9 |
69093 |
2559 |
| ZDU30-700 |
700 |
558 |
11 |
217.1 |
119.3 |
170.5 |
83139 |
2980 |
| For more technical parameters of steel sheet piles, please contact us for details |
Our Advantages
Excellent characteristics
As a reusable green and environment-friendly foundation structure material, hot-rolled U-shaped steel sheet piles are highly efficient, durable, simple, lightweight, and have an excellent cross-sectional shape that is sealed and anti-seepage. And unique advantages such as safety and environmental protection.Compared with other structures, it has a light structure, strong bearing capacity, and good earthquake resistance; strong water insulation, which can make the structure quickly stop water or plug leaks, impervious to penetration and easy to construct.
Major application
The first phase project of Shanghai Changxing Island Shipbuilding Base, Tangshan Caofeidian Coal Wharf and other major projects, the amount of one-time steel sheet piles for these projects has reached 10,000 tons. In addition, in the application of foundation pit enclosure, water retaining cofferdam, wharf construction, etc., such as the second phase project of Pudong International Airport, Shanghai World Expo Project, and the temporary enclosure of steel sheet piles for Hangzhou Bay Bridge are also relatively large.
Attention to detailSteel sheet piles are inspected for appearance surface defects, length, width, thickness, height, end square ratio, straightness and lock shape, and channel steel piles are inspected for appearance surface defects, length, width, thickness, height, end angle , straightness and other inspections, cut off the welded parts on the pile that affect the pile driving (there are cut holes and section defects should be reinforced).
Full range
Cold-formed steel sheet piles and hot-rolled steel sheet piles can be produced in U-shape, Z-shape, and W-shape. The manufacturing process is different. The wall thickness of cold-formed steel sheet piles is the same, and the thickness of hot-rolled steel sheet piles is different in different parts. do thick.
The length of hot-rolled steel sheet piles is generally limited, mainly 9 meters, 12 meters, 15 meters, 18 meters, 400 wide, and 600 wide. The water stop effect is generally better than that of cold bending, and the market stock is large.
Quality first: production and inspection in strict accordance with production standards;
Price advantage: discounts based on real market prices;
Transaction security: There will be no loss of customer funds;
After-sales guarantee: the customer's problem is our problem;
Long-term cooperation: quality assurance, price advantage, sincere service can last for a long time.
Detailed Photos
Packaging & Shipping
Company Profile
Shandong Zhengde Metal Manufacturing Co., Ltd. is a production and sales company integrating hot-rolled steel coils, cold-rolled steel coils, galvanized steel coils, color-coated steel coils, section steel, steel pipes, steel wires, metal mesh, stainless steel, aluminum, copper and other metal products integrated large enterprises. Five production and sales bases have been formed in Binzhou, Liaocheng, Wuxi, Tianjin, Jinan and Tai'an, with more than 100 production lines, 4 nationally recognized laboratories, 2 technical engineering centers, and 5 enterprise technology centers. Products are exported to more than 50 countries and regions such as North America, South America, Europe, Africa, Oceania, Middle East, and Southeast Asia.
Certifications
){kind=link}