Factory ASTM A36 Q235 S335gr A572 100X100mm Gr60 and Other Hot-Rolled/Cold-Formed Teel Sheet Piles Angle Steels Channel

• Customization: Available
• Grade: SS355JR
• Standard: AISI, JIS, ASTM, DIN, BS, GB
• Model NO.: ZD-HRH
• Certification: IS0, RoHS, ABS
• Material: ASTM A36 A572 A992 S235jr/J0/J2 S355jr/J0/J2
• Custom Made: Yes
• Custom Cycle: 7-15 Days
• Product Name: H Beam
• Payment Term: 30%T/T Advance + 70% Balance
• Alloy or Not: Low Alloy
• MOQ: 3tons
• Lengh: Customized
• Advantage: Wear Resistance, Machinability, Easy Welding
• Specification2: W4 W5 W6 W8
• Specification3: Ipe AA100 120 140 160 180 200
• Standard1: ASTM a 6/a 6m-07 BS 4-1:1993 En 10024 JIS G 3192
• Surface Treatment: Galvanized, Coated or Custom
• Shipped Method: by Container or by Bulk Vessel
• Channel Shape: U C Upn
• Transport Package: Export Standard Package/as Request
• Specification: According to customer requirements
• Trademark: ZHENGDE
• Origin: China
• HS Code: 7216101000
• Production Capacity: 50000 Tons/Month

Product Description

Product Description

H-beam:

H-shaped steel is an economical cross-section high-efficiency section with more optimized cross-sectional area distribution and a more reasonable strength-to-weight ratio. It is named because its cross-section is the same as the English letter "H". Since all parts of the H-shaped steel are arranged at right angles, the H-shaped steel has the advantages of strong bending resistance in all directions, simple construction, cost saving and light structural weight, and has been widely used.

H-shaped steel is a widely used profile in steel structure buildings today, and it has many differences compared with I-shaped steel. The first is the flange, and second, the inner surface of the flange has no inclination, and the upper and lower surfaces are parallel. The cross-sectional properties of H-beams are significantly better than traditional I-beams, channel steels and angle steels.

The two outer and inner sides of the H-shaped steel have no slope and are straight. This makes the welding and splicing of H-beams easier than I-beams, and has better mechanical properties per unit weight, which can save a lot of materials and construction time. The section of the I-beam is well subjected to vertical pressure and resistant to tension, but the section size cannot resist torsion because the wing plate is too narrow. H steel is the opposite, both have their own advantages and disadvantages.

Universal Beams
Specification: BS EN 10025-2:2004   Dimension: BS4-1:2005   Tolerance: BS EN 10034:1993
Designation	h	b	s	t	Area	Ix	Iy	ix	iy	Zx	Zy
mmxmmxkg/m	mm	mm	mm	mm	cm^2	cm^4	cm^4	cm	cm	cm^3	cm^3
127x76x13	127.0	76.0	4.0	7.6	16.5	473	55.7	5.35	1.84	74.6	14.7
152x89x16	152.4	88.7	4.5	7.7	20.3	834	89.8	6.41	2.10	110	20.2
178x102x19	177.8	101.2	4.8	7.9	24.3	1,356	137	7.48	2.37	153	27.0
203x102x23	203.2	101.8	5.4	9.3	29.4	2,105	164	8.46	2.36	207	32.2
203x133x25	203.2	133.2	5.7	7.8	32.0	2,340	308	8.56	3.10	230	46.0
203x133x30	206.8	133.9	6.4	9.6	38.2	2,896	385	8.71	3.17	280	57.5
254x102x22	254.0	101.6	5.7	6.8	28.0	2,841	119	10.10	2.06	224	23.5
254x102x25	257.2	101.9	6.0	8.4	32.0	3,415	149	10.30	2.15	266	29.0
254x102x28	260.4	102.2	6.3	10.0	36.1	4,005	179	10.50	2.22	308	35.0
254x146x31	251.4	146.1	6.0	8.6	39.7	4,413	448	10.55	3.36	351	61.0
254x146x37	256.0	146.4	6.3	10.9	47.2	5,537	571	10.80	3.48	433	78.0
254x146x43	259.6	147.3	7.2	12.7	54.8	6,544	677	10.90	3.52	504	92.0
305x102x25	305.1	101.6	5.8	7.0	31.6	4,455	123	11.87	1.97	292	24.2
305x102x28	308.7	101.8	6.0	8.8	35.9	5,366	155	12.23	2.08	348	30.5
305x102x33	312.7	102.4	6.6	10.8	41.8	6,501	194	12.47	2.15	416	37.9
305x127x37	304.4	123.4	7.1	10.7	47.2	7,171	336	12.30	2.67	471	54.5
305x127x42	307.2	124.3	8.0	12.1	53.4	8,196	389	12.40	2.70	534	62.6
305x127x48	311.0	125.3	9.0	14.0	61.2	9,575	461	12.50	2.74	616	73.6
305x165x40	303.4	165.0	6.0	10.2	51.3	8,503	764	12.90	3.86	560	93.0
305x165x46	306.6	165.7	6.7	11.8	58.7	9,899	896	13.00	3.90	646	108
305x165x54	310.4	166.9	7.9	13.7	68.8	11,700	1063	13.00	3.93	754	127
356x127x33	349.0	125.4	6.0	8.5	42.1	8,249	280	14.00	2.58	473	45.0
356x127x39	353.4	126.0	6.6	10.7	49.8	10,172	358	14.30	2.68	576	57.0
356x171x45	351.4	171.1	7.0	9.7	57.3	12,070	811	14.50	3.76	687	95.0
356x171x51	355.0	171.5	7.4	11.5	64.9	14,140	968	14.80	3.86	796	113
356x171x57	358.0	172.2	8.1	13.0	72.6	16,040	1108	14.90	3.91	896	129
356x171x67	363.4	173.2	9.1	15.7	85.5	19,460	1362	15.10	3.99	1,071	157
406x140x39	398.0	141.8	6.4	8.6	49.7	12,508	410	15.90	2.87	629	58.0
406x140x46	403.2	142.2	6.8	11.2	58.6	15,685	538	16.40	3.03	778	76.0
406x178x54	402.6	177.7	7.7	10.9	69.0	18,720	1021	16.50	3.85	930	115
406x178x60	406.4	177.9	7.9	12.8	76.5	21,600	1203	16.80	3.97	1,063	135
406x178x67	409.4	178.8	8.8	14.3	85.5	24,330	1365	16.90	3.99	1,189	153
406x178x74	412.8	179.5	9.5	16.0	94.5	27,310	1545	17.00	4.04	1,323	172
457x152x52	449.8	152.4	7.6	10.9	66.6	21,370	645	17.90	3.11	950	85.0
457x152x60	454.6	152.9	8.1	13.3	76.2	25,500	795	18.30	3.23	1,122	104
457x152x67	458.0	153.8	9.0	15.0	85.6	28,930	913	18.40	3.27	1,263	119
457x152x74	462.0	154.4	9.6	17.0	94.5	32,670	1047	18.60	3.33	1,414	136
457x152x82	465.8	155.3	10.5	18.9	104.5	36,590	1185	18.70	3.37	1,571	152.5
457x191x67	453.4	189.9	8.5	12.7	85.5	29,380	1452	18.50	4.12	1,296	153
457x191x74	457.0	190.4	9.0	14.5	94.6	33,320	1671	18.80	4.20	1,458	176
457x191x82	460.0	191.3	9.9	16.0	104.5	37.050	1871	18.80	4.23	1,611	196
457x191x89	463.4	191.9	10.5	17.7	113.8	41,020	2089	19.00	4.29	1,770	218
457x191x98	467.2	192.8	11.4	19.6	125.3	45,730	2347	19.10	4.33	1,957	243
533x210x82	528.3	208.8	9.6	13.2	104.7	47,540	2007	21.30	4.38	1,800	192
533x210x92	533.1	209.3	10.1	15.6	117.4	55,230	2389	21.70	4.51	2,072	228
533x210x101	536.7	210.0	10.8	17.4	128.7	61,520	2692	21.90	4.57	2,292	256
533x210x109	539.5	210.8	11.6	18.8	138.9	66,820	2943	21.90	4.60	2,477	279
533x210x122	544.5	211.9	12.7	21.3	155.4	76,040	3388	22.10	4.67	2,793	320
610x229x101	602.6	227.6	10.5	14.8	128.9	75,780	2915	24.20	4.75	2,515	256
610x229x113	607.6	228.2	11.1	17.3	143.9	87,320	3434	24.60	4.88	2,874	301
610x229x125	612.2	229.0	11.9	19.6	159.3	98,610	3932	24.90	4.97	3,221	343
610x229x140	617.2	203.2	13.1	22.1	178.2	111,800	4505	25.00	5.03	3,622	391
610x305x149	612.4	304.8	11.8	19.7	190.0	125,900	9308	25.70	7.00	4,111	611
610x305x179	620.2	307.1	14.1	23.6	228.0	153,000	11408	25.90	7.07	4,935	743
610x305x238	635.8	311.4	18.4	31.4	303.3	209,500	15837	26.28	7.22	6,589	1,017
686x254x125	677.9	253.0	11.7	16.2	159.5	118,000	4383	27.20	5.24	3,481	346
686x254x140	683.5	253.7	12.4	19.0	178.4	136,300	5183	27.60	5.39	3,987	409
686x254x152	687.5	254.5	13.2	21.0	194.1	150,400	5784	27.80	5.46	4,374	455
686x254x170	692.9	255.8	14.5	23.7	216.8	170,300	6630	28.00	5.53	4,916	518
762x267x134	750.0	264.4	12.0	15.5	171.0	150,700	4788	29.70	5.30	4,018	362
762x267x147	754.0	265.2	12.8	17.5	187.2	168,500	5455	30.00	5.40	4,470	411.4
762x267x173	762.2	266.7	14.3	21.6	220.4	205,300	6850	30.52	5.58	5,387	513.7
762x267x197	769.8	268.0	15.6	25.4	250.6	240,000	8175	30.94	5.71	6,234	610.1
838x292x176	834.9	291.7	14.0	18.8	224.0	246,000	7799	33.14	5.90	5,893	534.7
838x292x194	840.7	292.4	14.7	21.7	264.8	279,200	9066	33.63	6.06	6,641	620.1
838x292x226	850.9	293.8	16.1	26.8	288.6	339,700	11360	34.31	6.27	7,985	773.3
914x305x201	903.0	303.3	15.1	20.2	255.9	325,300	9423	35.65	6.07	7,204	621.4
914x305x224	910.4	304.1	15.9	23.9	285.6	376,400	11240	36.30	6.27	8,269	739
914x305x253	918.4	305.5	17.3	27.9	322.8	436,300	13300	36.76	6.42	9,501	870.8
914x305x289	926.6	307.7	19.5	32.0	368.3	504,200	15600	37.00	6.51	10,880	1,014
914x419x343	911.8	418.5	19.4	32.0	437.3	625,800	39160	37.83	9.46	13,730	1,871
914x419x388	921.0	420.5	21.4	36.6	494.2	719,600	45440	38.16	9.56	15,630	2,161

 

Jumbo Beams
Specification: BS EN 10025-2:2004   Dimension: ASTM A6-11   Tolerance: BS EN 10034:1993
Designation	h	b	s	t	Area	Ix	Iy	ix	iy	Zx	Zy
mmxmmxkg/m	mm	mm	mm	mm	cm^2	cm^4	cm^4	cm	cm	cm^3	cm^3
1016x305x222	970.3	300.0	16.0	21.1	282	406,500	9,501	37.95	5.80	8,380	633
1016x305x249	980.0	300.0	16.5	26.0	317	481,100	11,750	38.97	6.09	9,818	784
1016x305x272	990.1	300.0	16.5	31.0	347	553,800	14,000	39.96	6.35	11,190	934
1016x305x314	1000.0	300.0	19.1	35.9	400	644,700	16,280	40.15	6.38	12,890	1085
1016x305x349	1008.1	302.0	21.1	40.0	444	722,300	18,460	40.32	6.45	14,330	1222
1016x305x393	1016.0	303.0	24.4	43.9	500	807,700	20,500	40.18	6.40	15,900	1353
1016x305x415	1020.0	304.0	26.0	46.0	529	853,100	21,710	40.17	6.41	16,728	1428
1016x305x438	1026.0	305.0	27.0	49.0	557	909,800	23,360	40.41	6.47	17,740	1532
1016x305x494	1036.0	309.0	31.0	54.0	629	1,028,000	26,820	40.42	6.53	19,845	1736
1016x305x584	1056.0	314.0	36.0	64.0	744	1,246,100	33,430	40.93	6.70	23,600	2130

 

IPE
Specification: BS EN 10025-2:2004   Dimension: Euronorm 19-57   Tolerance: BS EN 10034:1993
Designation		h	b	s	t	Area	Ix	Iy	ix	iy	Zx	Zy
Ttype	mmxmmxkg/m	mm	mm	mm	mm	cm^2	cm^4	cm^4	cm	cm	cm^3	cm^3
AA100	100x55x6.7	97.6	55.0	3.6	4.5	8.56	136	12.6	3.98	1.21	27.9	4.57
AA120	120x64x8.4	117.0	64.0	3.8	4.8	10.7	244	21.1	4.79	1.41	41.7	6.59
AA140	140x73x10.1	136.6	73.0	3.8	5.2	12.8	407	33.8	5.64	1.63	59.7	9.27
AA160	160x82x12.1	156.4	82.0	4.0	5.6	15.4	646	51.6	6.47	1.83	82.6	12.6
AA180	180x91x14.9	176.4	91.0	4.3	6.2	19.0	1,020	78.1	7.32	2.03	116	17.2
AA200	200x100x18.0	196.4	100.0	4.5	6.7	22.9	1,533	112	8.19	2.21	156	22.4

 

Japanese I-sections (Tapered Flange)
Specification: BS EN 10025-2:2004   Dimension: JIS G3192:2008   Tolerance: JIS G3912:2008
Designation	h	b	s	t	Area	Ix	Iy	ix	iy	Zx	Zy
mmxmmxkg/m	mm	mm	mm	mm	cm^2	cm^4	cm^4	cm	cm	cm^3	cm^3
150x75x17.1	150	75	5.5	9.5	21.83	819	57.5	6.12	1.62	109	15.3
200x100x26.0	200	100	7	10	33.06	2,170	138	8.11	2.05	217	27.7

 

Japanese H-sections
Specification: BS EN 10025-2:2004   Dimension: JIS G3192:2008   Tolerance: JIS G3912:2008
Designation	h	b	s	t	Area	Ix	Iy	ix	iy	Zx	Zy
mmxmmxkg/m	mm	mm	mm	mm	cm^2	cm^4	cm^4	cm	cm	cm^3	cm^3
100x100x16.9	100	100	6	8	21.59	378	134	4.18	2.49	75.6	26.7
125x125x23.6	125	125	6.5	9	30.00	839	293	5.29	3.13	134	46.9
150x75x14.0	150	75	5	7	17.85	666	49.5	6.11	1.66	88.8	13.2
175x90x18.0	175	90	5	8	22.90	1,210	97.5	7.26	2.06	138	21.7
200x100x17.8	198	99	4.5	7	22.69	1,540	113	8.25	2.24	156	22.9
200x100x20.9	200	100	5.5	8	26.67	1,810	134	8.23	2.24	181	26.7
250x125x25.1	248	124	5	8	31.99	3,450	255	10.4	2.82	278	41.1
250x125x29.0	250	125	6	9	36.97	3,960	294	10.4	2.82	317	47.0

Our Advantages

High Strength
The H-beam produced by Zhengde Metal has high structural strength and light weight; the design style is flexible and rich;
The project construction is fast, the floor area is small, and it is suitable for all-weather construction. It is convenient for machining, structural connection and installation, and easy to dismantle and reuse.

Adequate inventory
The steel structure mainly consists of hot-rolled H-shaped steel, with good plasticity and toughness, and high structural stability
Strong ability to resist natural disasters, especially suitable for building structures in earthquake-prone areas;
Compared with the concrete structure, it can increase the use area of the structure; compared with the welded H-shaped steel, it can obviously save labor and materials, low residual stress, and good appearance and surface quality.

Attention to detail
The advantages of H-beam produced by Zhengde Metal:
Full range of steel types: carbon structural steel, low-alloy structural steel, structural steel for hull, weather-resistant structural steel
Good technology: automatic continuous rolling, laser cutting, precise straightening
Large output: 8 production lines with a daily output of 1600 tons

Applicable scene
H-shaped steel is mainly used for beam and column members in industrial and civil structures. for example
1. Steel structure load-bearing brackets of industrial structures
2. Steel piles and supporting structures for underground engineering
3. Industrial equipment structure such as petrochemical industry and electric power
4. Long-span steel bridge components
5. Ship and machinery manufacturing frame structure
6. Girder brackets for trains, automobiles, and tractors
7. Port conveyor belt, high-speed baffle support

Quality first: production and inspection in strict accordance with production standards;
Price advantage: discounts based on real market prices;
Transaction security: There will be no loss of customer funds;
After-sales guarantee: the customer's problem is our problem;
Long-term cooperation: quality assurance, price advantage, sincere service can last for a long time.

Detailed Photos

Packaging & Shipping

Company Profile

Shandong Zhengde Metal Manufacturing Co., Ltd. is a production and sales company integrating hot-rolled steel coils, cold-rolled steel coils, galvanized steel coils, color-coated steel coils, section steel, steel pipes, steel wires, metal mesh, stainless steel, aluminum, copper and other metal products integrated large enterprises. Five production and sales bases have been formed in Binzhou, Liaocheng, Wuxi, Tianjin, Jinan and Tai'an, with more than 100 production lines, 4 nationally recognized laboratories, 2 technical engineering centers, and 5 enterprise technology centers. Products are exported to more than 50 countries and regions such as North America, South America, Europe, Africa, Oceania, Middle East, and Southeast Asia.

Certifications